11
Nov
11

Let’s talk Turkey!

Gobble, Gobble!!

I thought it would be fun to have a tutorial on a simple turkey.

This could be made in to a magnet or pin.

You will need:

Caramel Cernit

Opaque White Cernit

Poppy red Cernit just a pinch

Orange Cernit

Black Cernit just a pinch

Clay Machine

Clay Slicing Blade

Bamboo skewer

Sun like cutter from Flowers and leaves Makin’s clay cutter set

5/16″ Kemper Kutter flower

3/4″ Kemper Kutter Round

Condition Opaque White clay and roll out in the clay machine on the 4th thickest setting. You can roll through the machine several times to get a nice smooth sheet.

Cut out one of the sun “like” shaped cutters and lay on work surface.

Condition and roll out the caramel on the 3rd thickest setting. Cut out one of the sun “Like” shapes.

Place the caramel one on top of the white one and off set it so the whites points show between the Caramel points.

Flatten the two together with the palm of your hand, preferably the rounded cup of your palm.

Cut out two circles of Caramel out of the round 3/4″ cutter. Put them together and roll into a ball. Then using your forefinger roll on one side of the ball and rolling in to a bowling pin shape.

Like so!

With the back of the clay blade (careful now!) Make a mark about 1/8″ to 1/4″ down from the top of the small end of clay bowling pin shape.

Bend the tip over at the mark.

Place the bowling pin caramel shape on the  two cut out sun “like” shapes and press the thicker end to the shapes like you see in the picture.

Make marks with the end of your blade around the turkey body where the indents are around the outside of the sun points in the brown flower/sun are. This step is optional, but does add a little more to the turkey.

Roll out the orange clay on the 2nd thickest setting and cut out two of the 5/16″ flower.

Push them out of the cutter and pinch two of the petals of the flower together.

Place the flowers that are now feet, with the pinched petals in the back,under the thick flattened end of the bowling pin caramel shape.

Cut out another flower shape.

We are just going to use this for the size, so roll that flower in to a little ball.

Roll on one side of the ball  to shape it in to a shape it in to a little teardrop.

Just like this.

Place this little teardrop thick end first on the end of the bowling pin caramel top of the bowling pin.

You will able to see it in the picture after I put the eyes on.

Roll out a very small coil of black and cut off a tiny, tiny section.

Cut two of them and roll them into balls.

They a will be very small, like a 1/16″.

Here is the placement of eyes and beak.

Now we are going to make the pieces for the waddle. Roll out a small coil of the poppy red.

Cut off  two short pieces and one long one.

Roll them all in to balls and then roll them in to elongated teardrops.

Place one of the two small ones on top of the head.

Then place the other.

You can see where the red pieces go, here.

Looking a little like a turkey now.

Poke two holes in the beak, so he can breathe.

With the side of the flower cutter mark the chest with marks for feathers.

Like this.

 Use the flowers cutter and cut out four flowers  out of the caramel sheet that is rolled out on the 3rd thickest setting.

Put two together and roll in to a ball.

Do that with the other two.

Roll those into teardrops.

Flatten those teardrops.

With the back of the blade mark both wings on the tips.

Now mark the wings with the flower cutter and mark horizontal marks on the tips too.

Place the wings on the thick end of the body.

Your turkey is done.

I thought it would be fun to have a tutorial on a simple turkey.

This could be made in to a magnet or pin.

You will need:

Caramel Cernit

Opaque White Cernit

Poppy red Cernit just a pinch

Orange Cernit

Black Cernit just a pinch

Clay Machine

Clay Slicing Blade

Bamboo skewer

Sun like cutter from Flowers and leaves Makin’s clay cutter set

5/16″ Kemper Kutter flower

3/4″ Kemper Kutter Round

Condition Opaque White clay and roll out in the clay machine on the 4th thickest setting. You can roll through the machine several times to get a nice smooth sheet.

Cut out one of the sun “like” shaped cutters and lay on work surface.

Condition and roll out the caramel on the 3rd thickest setting. Cut out one of the sun “Like” shapes.

Place the caramel one on top of the white one and off set it so the whites points show between the Caramel points.

Flatten the two together with the palm of your hand, preferably the rounded cup of your palm.

Cut out two circles of Caramel out of the round 3/4″ cutter. Put them together and roll into a ball. Then using your forefinger roll on one side of the ball and rolling in to a bowling pin shape.

Like so!

With the back of the clay blade (careful now!) Make a mark about 1/8″ to 1/4″ down from the top of the small end end of clay bowling pin shape.

Bend the tip over at the mark.

Place the bowling pin caramel shapeon the  two cut out sun “like” shapes and press the thicker end to the shapes like you seeinthe picture.

Make marks with the end of your blade around the turkey body where the indents are around the outside of the sun points in the brown flower/sun are. This step is optional, but does add a little more to the turkey.

Roll out the orange clay on the 2nd thickest setting and cut out two of the 5/16″ flower.

Push them out of the cutter and pinch two of the petals of the flower together.

Place the flowers that are now feet, with the pinched petals in the back,under the thick flattened end of the bowling pin caramel shape.

Cut out another flower shape.

We are just going to use this for the size, so roll that flower in to a little ball.

Roll on one side of the ball  to shape it in to a shape it in to a little teardrop.

Just like this.

Place this little teardrop thick end first on the end of the bowling pin caramel top of the bowling pin.

You will able to see it in the picture after I put the eyes on.

Roll out a very small coil of black and cut off a tiny, tiny section.

Cut two of them and roll them into balls.

They a will be very small, like a 1/16″.

Here is the placement of eyes and beak.

Now we are going to make the pieces for the waddle. Roll out a small coil of the poppy red.

Cut off  two short pieces and one long one.

Roll them all in to balls and then roll them in to elongated teardrops.

Place one of the two small ones on top of the head.

Then place the other.

You can see where the red pieces go, here.

Looking a little like a turkey now.

Poke two holes in the beak, so he can breathe.

With the side of the flower cutter mark the chest with marks for feathers.

Like this.

 Use the flowers cutter and cut out four flowers  out of the caramel sheet that is rolled out on the3rd thickest setting.

Put two together and roll in to a ball.

Do that with the other two.

Roll those into teardrops.

Flatten those teardrops.

With the back of the blade mark both wings on the tips.

Now mark the wings with the flower cutter and mark horizontal marks on the tips too.

Place the wings on the thick end of the body.

Your turkey is done.


0 Responses to “Let’s talk Turkey!”



  1. Leave a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


November 2011
M T W T F S S
« Oct   Dec »
 123456
78910111213
14151617181920
21222324252627
282930  

Marie’s Etsy Shop

Marie’s Etsy Hoarders Closet

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 56 other followers

Flickr Photos

More Photos