10
Oct
10

Paper clip jar and paper clips or boomarkers Part 3

Continuing from part 2…

 

You will need two 1/2″ balls of the mixed green clay for each paper clip you make. 

Flatten both balls with your finger. Lay the paper clip on the one of flattened balls.

Cover the paper clip and the flattened ball with the other flattened ball.

Press in one of the animal face buttons.

You will notice that all of the faces are different and you may need to change the shape of the balls a little after you press them over the paper clip and before you press in the button. You do not want to put the paper clip too high towards the middle of the first flattened ball either or you will have trouble when you press the shank of the button in to the clay.

Once you get all of the buttons made in to paper clips that you think you will need bake the lid and the paper clips on a piece of corrugated cardboard box lid in a pre-heated 275 degree oven for 30 minutes, shut off the oven and let cool in the oven.

While the pieces are cooling, condition and roll out a piece of the opaque white Cernit. It will depend on how big the little jar is and how much you want to say. You can press the noodles in to the white and cut around what you said or you can cut the clay to fit on the front of the jar and make the noodles fit, which is what I did.

I have put it on the front of the glass and then I trimmed the edges.

I then placed the noodles in one at a time to form the words. You can use a pencil eraser to press them in to the clay.

Keep adding the noodles until you say what you have to say!

Once I have finished I roll the jar and the clay across my work surface to smooth the clay and press in all the letters evenly. Gentle now.

Bake this in the pre-heated 275 degree oven for 30 minutes and shut off the oven and let cool.

While you are waiting for the plaque to cool, take the green felt and another baby food jar lid and trace around the lid with a felt pen.

Cut inside the line that you have traced about 3/16″.

Place glue in the top of the lid and spread it all the way to the edges with your finger.

Add the felt and press it in there well, making sure you do all the way around the edge of the felt.

Take the plaque off of the jar when it is cool and pick out all of the letters with a knife.

Brush the Pearl Emerald Green Lumiere into the letters and all over the front of the plaque. Wipe off the excess with an rag or towel.

When the paint has dried, place glue on the back of the plaque, rub a smooth layer on the back, and attach to the front of the glass.

Tie a bow with the ribbon around the jar at the top.

A cute gift and trash to treasure.

Advertisements

0 Responses to “Paper clip jar and paper clips or boomarkers Part 3”



  1. Leave a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


October 2010
M T W T F S S
« Sep   Nov »
 123
45678910
11121314151617
18192021222324
25262728293031

Marie’s Etsy Shop

Marie’s Etsy Hoarders Closet

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 56 other followers

Flickr Photos